Fuji Spray Semi-PRO 2 Gravity HVLP Spray System with Pro Accessory Bundle

Fuji Spray 2030 400cc Gravity Cup Parts Kit

Keep your Fuji Spray equipment in top shape with consistent maintenance and upkeep. The Fuji Spray 2030 400cc Gravity Cup Parts Kit will ensure that you always have spare substitutes for your 400cc side mounted paint cup should its parts wear out. Consisting of five pressure tubes with check valves and five cup gaskets the kit will provide you with a peace of mind and guarantee consistent results.

Fuji Spray 6-Feet Flexible Whip Hose (Blue)

The Fuji Spray 6-Feet Flexible Whip Hose is a conveniently flexible hose extender for the Fuji Spray system. Being lightweight, the hose reduces user fatigue while its flexibility allows for effortless maneuverability of the spray gun. This extension hose is especially useful for working with fast drying lacquers and latex paints, thanks to the fact that the spray gun is six feet further from the heat of the turbine. With the addition of the extension you won't have to worry about the finish drying too quickly. Use the Whip Hose in tandem with standard 25-feet hose.

Fuji Spray Semi-PRO 2 Gravity HVLP Spray System

Designed for strong performance and ease of use, the Fuji Spray Semi-PRO 2 Gravity HVLP Spray System enables the DIY enthusiasts to effectively paint and finish walls, ceiling, doors, fences, shutters, cabinets, and more. While most HVLP systems have low wattage resulting in weak performance, the Semi-PRO features a 1400 watt 2-stage Bypass Motor. Using Fuji Spray system you're in full control with the help of easy fan pattern adjusting and overspray prevention. Whether working inside or outside the house, bring the Fuji Semi-PRO 2 HVLP Spray System along so you can get the job done right!

M-Model Spray Gun

The M-Model non-bleed spray gun offers convenient rear pattern control and comes with 400cc gravity cup and 1.3mm aircap set. Designed for the weekender or hobby enthusiast, the 7002G M-Model gravity spray gun, allows the operator to easily get into tight spots. 

Fuji Spray Gun Cleaning Kit with Lubricant

Ensure peak performance and longevity of your spray gun with proper cleaning and maintenance of your equipment. Using Fuji Spray Gun Cleaning Kit you'll be able to easily remove residue from any and all spray gun parts, big and small. Included in the kit you will find a range of tools for proper upkeep of your spray gun.

Precise and Effective

The cleaning kit includes a variety of brush sizes, from extra long 12-inch pick-up tube brush to a set of micro brushes. Using these tools in combination with pick and detail end brush, among others, will allow you to clear even the narrowest passages and smallest holes. Additionally, the 19-piece cleaning kit includes Fuji Spray lubricant for use in assembly of the clean spray gun. Lubricant allows the needle to move freely and seal the fluid nozzle effectively.

Universal Design

The Fuji Spray cleaning kit is universally compatible and well suited for cleaning spray equipment of any competitor.

Maintenance Tips

Simple daily maintenance should be done once you have finished spraying for the day. Also, a thorough cleaning (dis-assembly and assembly of the spray gun) should be done weekly or when you are ready to store your spray gun for an extended period of time.

Fuji Spray 4009-2 Turbine Filters for Mini Mite and PRO Series (2-Pack)

The Fuji Spray 4009-2 Turbine Filters for Mini Mite and PRO Series is the small necessity for your Q-Series system spray gun than makes a huge difference in performance. Dirty filters reduce the power blown through the motor, overtime causing the turbine to overheat, reducing the life of the motor. Ensure your equipment is in top notch condition by maintaining and replacing your filters often. The 4009-2 is sold in pairs, offering dual filtration.

Clean Filters

Fuji Spray care instruction include cleaning the filters in warm water after every few uses. Eliminate the wait for your filters to dry before completing or starting a new project - have a few spare filters on hand in your tool box.

New Filters

If you can’t clean them any longer and the dust and dirt can’t be removed, it’s time to retire the filters and replace them with new ones. Don’t push the issue, remember that good performance is connected to the quality you aim to spray with.

Compatibility

Fuji Spray 4009-2 Turbine Filters for Mini Mite and PRO Series fit Semi-PRO 2, Hobby-PRO 2 and Mini-Mite Fuji Spray guns.

Fuji Spray M-Air Cap Set #2 for Semi-PRO and Hobby-PRO Spray Guns

The Fuji Spray M-Air Cap Set #2 for Semi-PRO and Hobby-PRO spray gun systems will deliver outstanding finish the Fuji Spray products are known for. This 1mm Fine air cap is designed for finer atomization and is suitable for most water-based lacquers and polyurethanes. A durable stainless steel needle and nozzle are made to last and ensure top-quality performance with each use.

*Note: This set is for use with Fuji Spray Semi-PRO and Hobby-PRO spray gun models only.

Fuji Spray M-Air Cap Set #5 for Semi-PRO and Hobby-PRO Spray Guns

The Fuji Spray M-Air Cap Set #5 for Semi-PRO and Hobby-PRO spray gun systems is designed for fast and efficient coverage of large areas with thicker layers. The 1.8mm air cap is suitable for use with most water and oil-based paints including: catalyzed lacquers, primers, varnishes, urethanes, enamels, industrial coatings (higher viscosity), sealers, polyurethanes, oil based paints, epoxy enamels, plastics, adhesives, floor paving paints, latex, splatter paints and multi-fleck paints. A durable stainless steel needle and nozzle are made to last and ensure top-quality performance with each use.

*Note: This set is for use with Fuji Spray Semi-PRO and Hobby-PRO spray gun models only.